Advertisement
4
P E D E S TA L F O R T E R R A A C WA L L B O X
—
Intended use
A pedestal for free-standing installation in inside
or outside areas is available as an alternative to
mounting the charging station on a wall.
Depending on the design and number of charging
stations the relevant number of empty pipes and
connection cables should be taken into consider-
ation in the concrete foundation.
If the charging station is installed with a plug-in
power supply line (e.g., for demonstration pur-
poses), you should ensure that there is sufficient
tension relief and edge protection for the power
supply line.
The respective national regulations must be ob-
served with regard to the installation of the
pedestals.
Weight (without charging station): 10,5 kg (single
/ back-to-back)
TAC Pedestal Single
6AGC085345
2×
SCREW; FLAT HEADED
DIN 923 M5X3(x12)
Stainless steel
2×
SCREW; HEX. SOCKET
HEAD M6X90 A2-70
DIN 6912
1×
EDGING L = 65 mm
1×
NUT. M6 UNI 5588 A2
1×
CONTACT WASHER M6
Back-to-Back Pedestal
6AGC085684
4× SCREW; FLAT HEADED
DIN 923 M5X3(x12)
Stainless steel
4× SCREW; HEX. SOCKET
HEAD M6X90 A2-70
DIN 6912
2×
EDGING L = 65 mm
2×
NUT. M6 UNI 5588 A2
2× CONTACT WASHER M6
Advertisement
