2.2 Connection with Target System
Connection of the IE-784000-R and the target system is performed using a separately available emulation probe
(EP-784915GF-R). See 2.1.3 Connection of EP-784915GF-R and target system of VOLUME 2: EP-784915GF-
R for details.
2.3 When Target System is not Connected
Even if the target system is not connected, the IE-784000-R can still be used. In this case, connect the chip set
board that contains the µ PD78P4916, µ PD78F4928, or µ PD78F4928Y (emulation chip) to connectors L1 and L2 of
the IE-784915-R-EM1 to start the IE-784000-R. See 2.1 Connection with IE-784000-R for details.
CHAPTER 2 INSTALLATION PROCEDURE
23