NEC IE-784915-R-EM1 User Manual page 45

CHAPTER 1 GENERAL DESCRIPTION
<1> Cables
The cables are used to connect CN1 and CN2 of the EP-784915-R-EM1 with the chip set board. The cables
come with earth clips and external sense clips connected.
• Earth clips
Connect them to GND of the target system.
They allow the GND potential of the IE-784000-R to become the same as that of the target system making
them resistant to static electricity and noise.
• External sense clips
8 sense clips are provided.
They are used to examine the voltage level of the IC pin mounted on the target system.
Figure 1-3. Emulation Probe (EP-784915GF-R)
Earth clips
100-pin GF
External sense clips
45