Pioneer KRL-46V Service Manual page 29

Flat screen tv
Hide thumbs Also See for KRL-46V:
Table of Contents

Advertisement

5
6. Special features
1. NORMAL STANDBY CAUSE (Page 1/16)
Display of a cause (code) of the last standby.
The cause of the last standby is recorded in EEPROM whenever possible.
Checking this code will be useful in finding a problem when you repair the troubled set.
2. EEP SAVE (Page 16/16)
Storage of EEP adjustment value
3. EEP RECOVER (Page 16/16)
Retrieval of EEP adjustment value from storage area.
7. Lamp error detection
1. Function
This LCD color TV set incorporates a lamp error detection feature that automatically turns off the power for safety under abnormal lamp or lamp
circuit conditions. If by any chance anything is wrong with the lamp or lamp circuit or if the lamp error detection feature is activated for some rea-
son, the following will result.
1) The power is interrupted in about 6 seconds after it is turned on.
(The power LED on the front of the TV set turns red from blue and keeps blinking in red: ON for 250 ms and OFF for 1 sec.).
2) If the above phenomenon 1) occurs 5 times consecutively, it becomes impossible to turn on the power. (The power LED remained red).
2. Measures
1) Checking with lamp error detection OFF
Enter the adjustment process mode, referring to 2. Entering and exiting the adjustment process mode.
If there is a problem with the lamp or lamp circuit, the lamp will go out. (The power LED is blue.)
Then, you can check the operation to see if the lamp and lamp circuit are in trouble.
2) Resetting the lamp error count
After the lamp and lamp circuit are found out of trouble, reset the lamp error count. If a lamp error is detected five consecutive times, the power
cannot be turned on. Using the cursor (
vice page 2/16. With the cursor (
"0".
Table of contents of adjustment process mode Page 2/16
INDUSTRY INIT
INDUSTRY INIT(-Hotel)
HOTEL MODE
Center Acutime
RESET
Backlight Acutime
RESET
LAMP ERROR RESET
ADJ PARAM SET
VIC XPOS
VIC YPOS
VIC SIGNAL TYPE
VIC READ
5
6
/
) key, move to the cursor to [LAMP ERROR RESET], Line 8 on adjustment process mode ser-
/
) keys, select the [LAMP ERROR RESET] value. Finally press the cursor (OK) eys to reset the value to
Enter
OFF
OFF
OFF
OFF
OFF
Enter
0
0
MAIN
OFF
KRL-46V
6
7
Resetting to "0"
7
8
A
B
C
D
E
F
29
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents