Pioneer KRL-46V Service Manual page 9

5
Attaching the stand unit
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent
it from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm that there are eight screws (four short
screws and four long screws) with the stand
unit.
2
Attach the supporting post for the stand unit
onto the base using the four long screws with
the hex key (supplied) as shown.
5
6
3
1
2
Hex key
Long
screw
NOTE
• To detach the stand unit, perform the steps in reverse
order.
KRL-46V
6
7
Insert the stand into the openings on the
bottom of the TV. (Hold the stand so it will
not drop from the edge of the base area.)
Insert and tighten the four short screws into
the four holes on the rear of the TV
Hex key
Short
screw
Soft
cushion
7
8
A
B
C
D
E
F
9
8