Manually From Network; Overcurrent Protection - Silvercrest SPSZ 3 A1 Quick Start Manual

˜ Disconnecting product

manually from network

Press
flashes .
This function only resets the product to
offline mode and starts the pairing mode .
If you want to remove all data from the
product and the cloud, refer to the chapter
"Additional functions",
wipe
˜ Overcurrent protection
The circuit breaker
current in case of overload or short circuit .
When the circuit breaker
– Remove the overload .
– Press the circuit breaker to reset .
Always leave enough clearance for the
circuit breaker to operate normally .
18 GB/IE/NI
for approx . 5 s until LED
4 ] [
data}
in the full instruction manual .
7 ] [
{Disconnect and
interrupts the electric
trips:
7 ] [
5 ] [