Sealey VS8193 Instructions

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
DO NOT use the bore scope if dropped and/or damaged.
7
DO NOT operate near live electrical wires.
7
DO NOT operate near moving parts such as pulleys, motors, gears or fans etc.
7
DO NOT bend the bore scope shaft tighter than 7cm radius (14cm diameter).
7
DO NOT expose the bore scope housing to water or other liquids.
7
DO NOT insert the bore scope shaft into locations whose temperature is greater than 113F° (45C°).
7
 Maintain the bore scope in good and clean condition for best and safest performance.
 A full range of personal safety equipment is available from your Sealey dealer.
 Wear suitable clothing to avoid snagging. Do not wear jewellery and tie back long hair.
 Account for all tools and parts being used and do not leave any in, or near, the engine.
 Be alert to your surrounding environment while using the bore scope.
Note the location of the object to be inspected and determine a route to it. Bend the bore scope shaft to follow
the route.
2. INTRODUCTION
Compact and versatile unit with colour video camera on a flexible Ø6 x 1000mm probe and 89mm LCD screen.
Suitable for viewing internal inspection of cylinder head bores, engine compartments and other
machinery/industrial applications. Features three tip mounted mirrors, 30º, 45º and 60º allowing a clear view in
confined spaces and a magnet attachment. Fitted with AV-out port and supplied with AV cable.
Supplied with comprehensive instructions in carry-case.
3. SPECIFICATION
Shaft Length . . . . . . . . . . . . . . . . . . . .1000mm
Probe Diameter . . . . . . . . . . . . . . . . .6mm
Viewing Angle . . . . . . . . . . . . . . . . . . .67°
Viewing Distance . . . . . . . . . . . . . . . .15 - 100mm
Resolution. . . . . . . . . . . . . . . . . . . . . .320 x 240 pixels
Screen . . . . . . . . . . . . . . . . . . . . . . . .89mm LCD Colour
Batteries . . . . . . . . . . . . . . . . . . . . . . .4 x AA (Supplied)
4. OPERATING INSTRUCTIONS
DO NOT use excessive force to insert or retrieve shaft from the equipment or areas under inspection.
7
DO NOT use the tip to push against objects or to clear a path. This instrument is for remote viewing only.
7
DO NOT bend any part of the shaft tighter than a 2.5 inch radius (5 inch diameter).
7
DO NOT insert the scope shaft and tip into locations where the temperature is greater than 113F° (45C°).
7
DO NOT vibrate, bang, or drop your scope. It is not shock resistant.
7
INSTRUCTIONS FOR:
VIDEO BORE SCOPE COMPACT
Ø6mm - 1000mm
MODEL No: VS8193
Original Language Version
Fig.1
VS8193 Issue: 1 - 05/01/10