Parameter Setting Procedures (Parameter Display In Numerical Order) - Mitsubishi Electric FATEC FR-A800 Manual

2
UNDERSTANDING INVERTER SYSTEM
2.5.3 Parameter setting procedures (parameter display in numerical
order)
This section explains how to change the setting value of Pr.1 Maximum frequency from "120 Hz" to
"60 Hz".
Turning ON the power of the inverter
1.
The operation panel is in the monitor mode.
Changing the operation mode
2.
Press
Parameter setting mode
3.
Press
appears.)
Selecting the parameter
4.
Turn
(initial value) appears.
Changing the setting value
Turn
"
5.
Press the setting dial (
PU combined operation mode (Pr.79 Operation mode selection = "3") is selected to display
the present set frequency.
2.5 How to use the operation panel FR-DU08
14
to choose the PU operation mode. The [PU] indicator turns ON.
to choose the parameter setting mode. (The parameter number read previously
until " " (Pr.1) appears. Press
to change the setting value to "
" are displayed alternately.
• Turn to read another parameter.
• Press
• Press
• Press
) in the monitor mode when the PU operation mode or External/
Operation
to read the present set value. "
". Press
to display the setting again.
twice to display the next parameter.
three times to return to the indication of the frequency.
to enter the setting. "
"
" and