Hitachi IJ UX2 User Manual page 11

Table of Contents

６ Follow the steps below to confirm that the network connection is properly established. The following steps

describe procedures for Windows 10.

Select [Start Menu] > [Windows System]

> [Command prompt] to open the

Command Prompt window.

Type the following command:

Ping 192.168.0.1

Note:

This command is not case sensitive.

Byte=32 time=24 ..in four consecutive

lines*1 then external unit settings are

completed.

*1:

In default, the ping command returns

the response for four times. For details

of the ping command, type the

following command: ping/help

If "Destination host unreachable."

response is returned for the ping

command, it means communication

has not been established between the

IJ Printer and external unit. Re-check

the following:

[Check points]

* Have the communication settings of

the IJ Printer been changed?

* Are the network settings of the

external unit correct?

Table of Contents