Communication Monitor; Communication Monitor Function - Hitachi IJ UX2 User Manual

5. Communication Monitor

5.1 Communication Monitor Function

● The contents of serial communications between the external device and IJ printer are displayed.
● Up to 3,000 bytes of data can be acquired at a time.
● When you press the Start , the system erases monitored data and acquires new data.
【Notes on communication monitor】
● During monitoring, the response performance of the external communication of the IJ printer may deteriorate.
When using the communication monitor, please use it with a margin in the communication timing.
(1) Screen display
Item
Trans.
Communication
description
Proc. status
(2) Function
Item
Start
Abort
Prev./Next
Back
External device → IJ printer
→ External device : S (Send)
IJ printer
Sended/received data are displayed in hexadecimal notation.
Sixteen bytes of data are displayed per line.
The current status is indicated (monitoring or interrupted).
Starts exercising the communication monitor function. Erases the monitored
information.
Aborts the execution of the communication monitor function.
Used to switch to another screen when the amount of information to be
displayed is too large to fit on a single screen.
Returns you to the setting menu.
Description
: R (Receive)
Description
14