Mitsubishi Electric AE-200A Instruction Book page 125

Item
Click [Date] to specify a date to display the data. The date can be specified as daily, monthly, or yearly.
Date to
display the
data
Note: The storage period of the energy use status data is as follows.
Year
Month
Date
Select a block name, group name, address number, or energy management block name to display the
Comparison
comparison data. (The comparison target selection screen is the same as the display target selection
target
screen.)
Comparison Specify a date to display the comparison data. (The comparison date selection screen is the same as the
date display target date selection screen.)
Select an item to display its data in the bar graph.
Select a display range from [Block], [Group], [Address], or [Energy management block] to display its data.
The selectable items vary, depending on the display range. Only the items that can be displayed in the
graph appear. Refer to the table below for details.
■ Indoor unit
Address
Group
Block
Display items
for bar graph
Energy
management block
*5
*1 The electric energy (kWh) consumed by indoor units will appear in the graph. The values are apportioned
*2 A small amount of electric energy consumption (kWh) may appear in the graph even when no indoor units
*3 The indoor unit's cumulative operation time (minute) for the selected item will appear in the graph.
*4 Only "FAN operation time" is displayed for LOSSNAY units.
*5 "Energy Management License Pack" is required. (AE-200E/AE-50E/EW-50E only)
WT07996X02
Year selection
Date selection Data storage period
The current year and the last 24 months
The current month and the last 24 months
The current day and the last 24 months
Display range
*5
*5
*5
based on the setting for "Indoor unit operation apportioning mode". Refer to the Instruction Book (Initial
Settings) for the "Indoor unit operation apportioning mode" setting.
have been operated. This is because the standby electric energy is apportioned, which is normal.
• "FAN operation time" is the cumulative duration of time in which the indoor unit is ON.
• "Thermo-ON time (Total/Cool/Heat)" is the cumulative duration of time in which the refrigerant is flowing
into the indoor unit. (Cool: when the Cool mode is selected; Heat: when the Heat mode is selected; Total:
when either mode is selected)
Description
Month selection
Display items for bar graph
Display item
*3 *4
*1 *2
125
Date selection
*3 *3 *3