2-4. Notice
2-4-1. Error List
Click [Notice] in the menu, and then click [Error List] to access the Error List screen.
A list of units that are currently malfunctioning will appear.
Group name
Unit address
Item
Controller
Reset All
Group name
Unit address
Error code
Reset
WT07996X02
Display target units can be narrowed down by selecting a centralized controller.
Click to reset the errors at once.
Note: The units whose error has been reset will stop.
Note: Only the errors of the centralized controller selected in [Controller] will be reset.
The name of the group that the unit in error belongs to will appear.
Note: The group name will not be displayed if the unit in error is a unit such as an outdoor
unit or a system controller.
The centralized controller No. and address of the unit in error will appear.
Note: For address display, refer to 4 "Name Display" in Chapter 1.
The error code that corresponds to the error will appear.
Click the error code to display the definition.
Click to reset each AHC error.
Description
78
Reset All
Click to reset all displayed
errors of the selected
centralized controller at
once.
Controller
Click to narrow down the
units in error to display into
centralized controller units.
Reset
Click to reset each AHC
error.
Error code