Installing The Hoses - Toro 31102 Installation Instructions Manual

Installing the Hoses

1. Loosely install the mid-length hydraulic hose to the
outboard port of the right-hand wing cylinder
13).
Note: Do not tighten the fitting.
Figure 13
1. Long hose
2. Mid-length hose
2. Route the hose under the hydraulic tank bracket and
to the tee fitting on the front of the manifold block
(Figure 14).
(Figure
g025303
3. Right-hand wing cylinder
4. Deck lift cylinder
1. Long hose
2. Deck lift valve tee fitting
Note: Make sure that the hose is not twisted and does
not contact any hot, sharp, or moving parts.
9
Figure 14
3. Short hose
4. Deck lift cylinder
g025294