Replacement Of Fader - Sony DVS-7000A Maintenance Manual

2-2. Control Panel

2-2-2. Replacement of Fader

2-2-2. Replacement of Fader
(1) Turn the fader grip of the fader to replace in the direction of the arrow and remove it.
(2) Open the panel. (Refer to the section 1-2-1.)
(3) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(4) When removing the fader (BKDS-7030) with installed to the adaptor box (BKDS-7075), remove the
two screws and the AD panel. (Refer to "3. Adaptor Box" in the section 1-2-3.)
When removing the fader in the main panel, remove the CPU-263 board.
(Refer to "3.CPU-263" in the section 1-2-5.)
(5) Disconnect the one connector.
KY-320/321/322/367 : CN13
KY-328 : CN12
(6) Remove the four screws securing the fader to replace.
PWH3 x 5
PWH3 x 5
(7) Install a new fader in the reverse order of the procedures (1) through (6).
2-6
Only KY-328 board
(BKDS-7030)
CN12
Fader assembly
Fader grips
CN13
DVS-7000AE MMP1