Replacement Of Power Unit - Sony DVS-7000A Maintenance Manual

2-2. Control Panel

2-2-5. Replacement of Power Unit

2-2-5. Replacement of Power Unit
w
Allow for more than five minutes interval after turning the power off, remove the power unit.
To avoid shock hazards, never remove the power unit just after turning the power off.
(1) Open the panel. (Refer to the section 1-2-1.)
(2) Turn off the power switch in the control panel. (Refer to the section 1-2-2.)
(3) Remove the two screws securing the power unit.
(4) Tilt the levers at both sides of the power unit in the direction of the arrow.
(5) Lift up the power unit in the direction of the arrow and remove it.
PS3 x 6
Lever
Lever
PS3 x 6
Power unit
(6) Install a new power unit in the reverse order of the procedures (1) through (5).
2-10
DVS-7000AE MMP1