Technical Specifications - Siemens SIMATIC S7-1500 Manual

Technical specifications

Technical specifications of the active backplane bus
The following table shows the technical specifications as of 07/2020. On the Internet, you
will find a data sheet with technical specifications that are updated daily for the active
backplane bus ST 1+12
0AA0/td?dl=en), active backplane bus ST 1+8
(https://support.industry.siemens.com/cs/de/en/pv/6ES7590-0BH00-0AA0/td?dl=en) and
active backplane bus ST 1+4
0BD00-0AA0/td?dl=en).
Article number
General information
Product type designation
HW functional status
Firmware version
• FW update possible
Product function
• I&M data
• Isochronous mode
• Prioritized startup
Engineering with
• STEP 7 TIA Portal configu-
rable/integrated from ver-
sion
• STEP 7 configura-
ble/integrated from ver-
sion
• PROFINET from GSD ver-
sion/GSD revision
Power
Power available from the
backplane bus
Power loss
Power loss, typ.
Hardware configuration
Slots
• Grid size
• Number of slots
22
(https://support.industry.siemens.com/cs/de/en/pv/6ES7590-0BL00-
(https://support.industry.siemens.com/cs/de/en/pv/6ES7590-
6ES7590-0BL00- 6ES7590-0BH00-
0AA0 0AA0
Active backplane ST Active Backplane ST
1+12 slot 1+8 Slot
FS01 From FS01
V1.0.0
Yes
Yes; I&M0 to I&M3
Yes
Yes
V16
V5.6 and higher
V2.34 / -
2 W
2 W
35 mm; Utilization of 25 mm-wide modules possible
13 9
Active backplane bus ST 1+12 slot, active backplane bus ST 1+8 slot, active backplane bus ST 1+4 slot
6ES7590-0BD00-
0AA0
Active Backplane ST
1+4 Slot
5
Equipment Manual, 07/2020, A5E46240468-AB
8