Problem
There is no video
on the TV screen
Possible Solution
Verify that the TV is powered on and set to the
appropriate input source for the DCT*.
Verify that the DCT* is powered on and tuned to an
authorized cable channel.
Verify that all video cables between the DCT* and the TV
are firmly connected.
Verify that the coaxial cable feed is firmly connected to
the DCT* and the wall jack.
The DCT* DVI output may not yet be enabled. Use the
component video (YPbPr) output instead.
If the DCT* video output is connected to a home theater
unit, verify that the home theater unit is powered on and
set to the appropriate input source.
If the DCT* video output is connected to a TV through a
DVI connection, power off the TV and then power off the
DCT*. Wait one second and then power on the devices.
Not all HDTVs can display every output format (1080i,
720p, 480p, or 480i) available on the DCT*. To select a
different format:
1
Ensure that your DCT* is plugged into a power
outlet and is turned off.
2
Press the
MENU
settings are displayed on the DCT* front panel
display.
3
Press the ▲ and ▼ keys to display the
DVI/YPbPr OUTPUT setting.
4
Press the ► key to cycle through the available
output formats until a picture displays on the TV.
34
key on the front panel. Your