Adjust Camera Image Quality - Motorola HMEZ2000 User Manual

Adjust Camera Image Quality

To change the quality of captured images, please follow the steps below.
1. Click on the DEVICE OVERVIEW button to open the Device Overview.
2. Click on the CONFIG icon. The camera properties panel will be displayed.
3. Change the numeric value of the brightness readout (increase the number to increase the brightness to a maximum of 100, or decrease to a minimum of
1) by directly entering a number, or by clicking on the + or - buttons until the desired value is displayed.
4. Click on the OK button. The change will take effect and will be visible in the live camera view.
5. A confirmation message will pop up. Click OK to dismiss the message.
6. Repeat steps 5, 6, and 7 for contrast.
7. Camera quality may be adjusted in the same manner; however, the result of the adjustment will not be visible in the live camera view. The Quality
adjustment affects the degree of image compression used with images captured by the camera. The higher the number, the higher the quality of the
image, and the more space (on your PC's hard disk) that will be occupied by the image.
8. If you should ever need to reset all settings to their default values (including the camera name), click on the DEFAULT button, then click the OK button.
9. Click on the CANCEL button to dismiss the camera properties window.
17 Motorola homesight™ USER GUIDE