Download Print this page

Toshiba CV-10HB Instruction Manual page 2

High-voltage vacuum contactors
Hide thumbs Also See for CV-10HB:

Advertisement

TOSHIBA
Read this manual carefully to fully understand the operation.
And keep for maintenance.
WARNING : Never rlsmodel
This equipment shall only be used inside a metal enclosure (grounded)
in other establishments than domestic , or those that are connected to
the public power source system.
1.
GENERAL
DESCRIPTION
(1) Ambient condition
The type CV vacuum cc'ntactor
The vacuum contactor should be used in the following conditions
-Altitude
-Ambient
- R e l a t i v e h u m i d i t y : 45% min. to 05% max.
CAUTION
(2) Locative condition
The location where the contactor is to be installed should be free from dust.
Corrosive gas and moi:sture.
When it is be used in a chemical plant or in outdoor panels,
take necessary precautions against corrosion,
water seepage and condensation.
See page 2.
or disassemble the equipment nor mount
is manufactured in accordance with IEC 60470(2000)
T a b l e 1
Normal service condition
Less
:
temperature
: -5°C min. to +4O"C max.
Its average over a period of 24h
does not exceed ~35°C
: 20Hz -9.8m/s2
:
Do not use in condition other than those specified
above , please consult
than 1 OOOm
o r l e s s

Advertisement

loading

This manual is also suitable for:

Cv-10hbl