How To Connect When Using Projection Mode - Hitachi HTCB-77G User Manual

Cambridge Board

1.3.3 How to Connect When Using Projection Mode

(a) How to connect when using USB cable
Connect the PC, projector, and the Cambridge Board according to the following
procedure.
RGB Cable
(1)
RGB
Projector
(1) Connect the RGB cable to the projector's RGB terminal, and fasten with the
integral screws.
(2) Connect the opposite side of the RGB cable connected in step (1) to the PC's RGB
terminal, and fasten with the integral screws.
(3) Connect the USB cable from the Cambridge Board to the USB terminal of the PC.
(4) Connect the power supplies of the PC and the projector to the mains.
With the USB connection, you can charge the rechargeable electronic pen away from
the Cambridge Board.
(2)
(3)
RGB USB
1-9
(4)
(4)
Power Outlet
Introduction
Cambridge Board
English