Hitachi HTCB-77G User Manual page 6

Cambridge Board
Safety Precautions
Securely insert the power plug into the
mains.
If it is not plugged in securely,
overheating will occur, possibly
resulting in electric shock or
fire.
Do not handle the power plug with a wet
hand.
Careless handling may result in
electric shock.
Before cleaning this product, unplug the
power cord.
Electric shock sometimes
results.
Do not use this product near water.
This may result in Electric
shock.
Do not damage, break, process, or forcibly
bend the mains lead.
If this is not observed, the
mains lead will be damaged,
resulting in fire or electric
shock.
Compliance required
WARNINGS
Before moving this product, detach the
power plug and the mains lead.
When plugging in or unplugging the
power cord, hold the plug, not the cable.
Periodically clean the power plug to
remove dust.
Be careful about the locations of the mains
lead, etc.
Use the product at the indicated power
supply voltage.
4
Safe Handling
If not removed correctly, the
mains lead might be damaged,
possibly resulting in electric
shock or fire.
If the mains lead is pulled, it
might be damaged, possibly
resulting in electric shock or
fire.
If a dirty plug is plugged into a
mains, fire or electric shock
might result.
The mains lead might trip
someone, possibly causing the
product to fall, etc., thereby
causing injury or product
failure. Consider the location
carefully.
If the product is used at a
power supply voltage other
than the one indicated, it will
fail, resulting in fire or electric
shock.
English