Demo Mode; Demo Mode In The Ui "Vision Vcu; Demo Mode In The Omega Ui - Electrolux OVC3000 Service Manual

15 - DEMO MODE

The Demo mode function is used for show rooms or shops. The user can find out the complete functionality
of the UI but for security reason the loads stay off.

15.1 - DEMO MODE IN THE UI "VISION VCU"

Activate / deactivate the demo mode:
1. From OFF state keep the main switch
pressed for at least 5 seconds.
The user interface enters stand-by for 5
seconds (buzzer sounds).
2. Release main switch and press the
combination
key mode + key favourite
seconds .
3. Buzzer sounds (3 x signal) and
- The demo mode is active if the indication
appears in the upper left side of frame.
- The demo mode is not active if there is no
indication in the upper left side of frame.
(see Fig. 47).

15.2 - DEMO MODE IN THE OMEGA UI

Activate / deactivate the demo mode:
1. From Off state keep the key main
pressed for at least 5 seconds (see Fig. 48).
2. The user interface enters standby mode for
5 seconds and jumps back to Off state.
Buzzer sounds (see Fig. 49).
3. Release key main
Technical Support - BSP
for two
(see Fig. 50).
Fig. 47
PRESS AND HOLD
Fig. 48
HOLD
Fig. 49
RELEASE
Fig. 50
44/47 599 73 09-98 Rev. 02