Demo Mode In The Exagon Ui - Electrolux OVC3000 Service Manual

4. After release the main switch keep the
combination key mode
simultaneously pressed for two seconds
(see Fig. 51.
- If the demo mode is active:
Indication of Demo Mode with icon "Demo" if the oven is switched on Demo
function (see Fig. 49).
- If the demo mode is deactivated:
No indication of "Demo" icon if the oven is switched on.

15.3 - DEMO MODE IN THE EXAGON UI

Activate / deactivate the demo mode:
1. In the OFF state the key "
to be pressed until a beep is audible then
turn the program selector to the 1st oven
function (STEP 2) (see Fig. 52).
2. The indicator "DEMO" starts flashing and the
rotary function has to be set back to "0"
(STEP 3) (see Fig. 53) .
3. Release key " " and turn temperature
+
selector right until beep is audible (step 4).
Buzzer sounds (3 x Beep) and
- If the demo mode is active:
Indication of Demo Mode with icon "Demo" if the oven is switched on Demo
function (see Fig. 53 and 54).
- If the demo mode is deactivated:
No indication of "Demo" icon if the oven is switched on.
Technical Support - BSP
+ key down
STEP 2
+ " (STEP 1) has
TURN
STEP 3
TURN
45/47
PRESS TOGETHER
Fig. 51
Fig. 52
Fig. 53
Fig. 54
STEP 1
PRESS AND HOLD
HOLD
STEP 4
599 73 09-98 Rev. 02