1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Cookers
  5. ZCG92696XA
  6. User manual

Zanussi ZCG92696XA User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
GETTING
STARTED?
EASY.
ZCG92696XA
EN User Manual
Cooker
EG

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZCG92696XA

Summary of Contents for Zanussi ZCG92696XA

  • Page 1 User Manual GETTING STARTED? EASY. ZCG92696XA EN User Manual Cooker...

  • Page 2: Safety Information

    VISIT OUR WEBSITE TO: Get usage advice, brochures, trouble shooter, service and repair information: www.zanussi.com/support SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage.
  • Page 3 accommodation where such use does not exceed (average) domestic usage levels. Only a qualified person must install this appliance and replace • the cable. This appliance is intended for use up to an altitude of 2000 m • above sea level. This appliance is not intended to be used on ships, boats or •...

  • Page 4: Safety Instructions

    If the mains power supply cable is damaged, it must be • replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Be careful when you touch the storage drawer. It can get hot. •...

  • Page 5: Gas Connection

    • The electrical installation must have an isolation • Be careful when you open the appliance door device which lets you disconnect the appliance while the appliance is in operation. Hot air can from the mains at all poles. The isolation device release.

  • Page 6: Care And Cleaning

    lift these objects up when you have to move • Concerning the lamp(s) inside this product and them on the cooking surface. spare part lamps sold separately: These lamps • Provide good ventilation in the room where the are intended to withstand extreme physical appliance is installed.

  • Page 7: Product Description

    PRODUCT DESCRIPTION GENERAL OVERVIEW Button for the kebab function Button for the lamp Display Knob for the grill and fan Knob for the oven functions Knobs for the hob Grill Lamp Motorized kebab motor Shelf positions COOKING SURFACE LAYOUT Auxiliary burner Steam outlet - number and position depend on the model Semi-rapid burner...

  • Page 8: Setting The Time

    Clean the oven and the accessories before the first Press again and again until the indicator for the use. Time of Day function flashes. Put the accessories and the removable shelf To set a new time, refer to "Setting the time". supports back to their initial position.

  • Page 9: Hob - Hints And Tips

    BURNER OVERVIEW A. Burner cap B. Burner crown C. Ignition candle D. Thermocouple (if applicable) TURNING THE BURNER OFF To put the flame out, turn the knob to the off position WARNING! Always turn the flame down or switch it off before you remove the pans from the burner.

  • Page 10: Hob - Care And Cleaning

    Diameter of cookware Diameter of cookware Burner Burner (mm) (mm) Triple Crown 160 - 260 Auxiliary 120 - 180 Rapid 160 - 240 ENERGY SAVING Semi-rapid 140 - 240 • If it is possible, always put the lids on the cookware.

  • Page 11: Oven Functions

    OVEN FUNCTIONS Oven function Application Off position The oven is off. MIN - Heat settings Range of temperature adjustment. 240°C Grilling To grill flat food in the middle of the grill. To make toast. Oven fan To thaw frozen food. To use the fan in combination with the gas oven burner ignite the gas oven and turn the knob for the grill clockwise to activate the fan.

  • Page 12: Using The Grill

    AFTER IGNITING THE OVEN GAS BURNER for the grill to the flame position. Hold the knob pushed down. 1. Release the knob for the oven functions. • For integrated ignition on the control knob 2. Close the oven door. push and turn the knob for the grill to the 3.

  • Page 13: Minute Minder

    Button Function Description PLUS To set the time. Clock functions table Clock function Application TIME OF DAY To set, change or check the time of day. MINUTE MINDER To set countdown time. This function has no effect on the opera- tion of the oven.
  • Page 14 WARNING! Make sure there is no spit handle inside the oven before operation. 1. Open the oven door. 2. Put the baking tray on the lowest shelf level. 3. Put the kebab shelf on the shelf position 4 and push it to the end. Refer to "Product description"...

  • Page 15: Oven - Hints And Tips

    14. Close the oven door. 15. Press the button for kebab function. 16. Make sure that turnspits rotate. 17. Close the oven door. When the meat is ready turn the knobs for the oven functions and temperature to the off position. Turn off the button for kebab function.

  • Page 16: Cooking Tables

    COOKING TABLES Casseroles Food Quantity (kg) Temperature (°C) Time (min) Shelf position 2.5 - 4.0 45 - 50 Lasagna Cannelloni 2.5 - 4.0 45 - 50 Potato gratin 2.5 - 3.0 60 - 65 Macaroni oven 4.0 - 4.5 40 - 45 Kebab Hala 3.5 - 4.0 40 - 50...
  • Page 17 Pizza Food Quantity (kg) Temperature (°C) Time (min) Shelf position Thin 1.5 - 2.5 20 - 30 Thick 1.5 - 2.0 20 - 25 Calzone 1.5 - 2.5 30 - 35 1) Preheat the oven for 15 minutes. Cakes Food Quantity (kg) Temperature (°C) Time (min)

  • Page 18: Oven - Care And Cleaning

    Food Quantity (kg) Grill position Time (min) Shelf position Toast browning 1.0 - 1.2 max. 7 - 10 Toast Hawai 1.0 - 2.0 max. 15 - 20 1) Preheat the oven for 10 minutes. Grilling with kebab shelf Quantity (g per Food Temperature (°C) Time (min)

  • Page 19: Removing The Shelf Supports

    WARNING! Be careful while cleaning Do not loosen the screws. the kebab shelf. The kit is heavy. Clean stubborn stains with a special oven cleaner. 1. Open the door fully. Do not clean the non-stick accessories using abrasive cleaner or sharp-edged objects. STAINLESS STEEL OR ALUMINIUM OVENS Clean the oven door with a damp cloth or sponge only.
  • Page 20 7. Clean the oven door with water and soap. Clean the inner side of the door. Dry the oven door carefully. 3. Close the oven door to the first opening When the cleaning is completed, install the glass position (halfway). Then pull forward and panels and the oven door.

  • Page 21: Replacing The Lamp

    REPLACING THE LAMP WARNING! Risk of electric shock. The lamp can be hot. 1. Turn off the oven. Wait until the oven is cooled down. 2. Disconnect the oven from the mains. 3. Put a cloth on the bottom of the cavity. The back lamp 1.
  • Page 22 Problem Possible cause Remedy You cannot activate or operate The fuse is blown. Make sure that the fuse is the the hob. cause of the malfunction. If the The oven does not heat up. fuse is blown again and again, contact a qualified electrician.

  • Page 23: Service Data

    Problem Possible cause Remedy The oven does not heat up. The necessary settings are not Make sure that the settings are set. correct. Turnspits do not rotate. There is too much food on the Check the maximum weight spits. per each spit. Refer to "Oven - Hints and tips"...
  • Page 24 Dimension TECHNICAL DATA Voltage 220 - 240 V Frequency 50 - 60 Hz Appliance class Minimum distances Dimension Dimension Height 870 - 915 Width Depth OTHER TECHNICAL DATA Appliance category: II2H3B/P Gas original: G30 (3B/P) 28-30 mbar Gas replacement: G20 (2H) 20 mbar BYPASS DIAMETERS BURNER Ø...
  • Page 25 INJECTOR MARK 1/100 BURNER NORMAL POWER kW REDUCED POWER kW Semi-rapid 0.45 Auxiliary 0.35 Oven Grill GAS BURNERS FOR LPG G30 28-30 mbar NORMAL POW- REDUCED POWER INJECTOR MARK BURNER GAS RATE g/h ER kW 1/100 mm Triple Crown 232.7 Rapid 225.4 Semi-rapid...
  • Page 26 • it can not get hotter than room temperature, higher than 30 °C, • it is not longer than 1500 mm, • it has no narrowing anywhere, • it is not twisted or tighten, • it does not get in touch with sharp edges or corners, •...
  • Page 27 2. Remove the knob for the hob. If there is no access to the bypass screw dismount the control panel before adjustment start. 3. With a thin and flat screwdriver adjust the bypass screw A. The model determines the position of the bypass screw A.
  • Page 28 3. With a thin and flat screwdriver adjust the GAS GRILL INJECTOR REPLACEMENT bypass screw A. 1. Release the screws which keep the grill burner The model determines the position of the in position A. bypass screw A. 2. Release the burner injector with a 7 mm socket spanner and replace it with a right one.
  • Page 29 2. Tilt the cooker backwards 30 degrees. 5. Carefully lay the cooker on the floor. If the floor is not equally flat, use the adjustable feet on the bottom of the appliance to set a stable position for the appliance. 30°...

  • Page 30: Electrical Installation

    ELECTRICAL INSTALLATION WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. This appliance is supplied with a main plug and a main cable. WARNING! The power cable must not touch the part of the appliance shaded in the illustration.
  • Page 32 WWW.ZANUSSI.COM/SHOP...

Table of Contents