Starting the Configuration package
To access the Configuration package the user has to log on as
a specific user (see page 331). This ensures user-specific and
user-defined settings and presets to be used.
The access to the entire configuration package is user
configuration dependent (see page 331).
To open the Configuration package
1.
2.
1. Select the operator
2. Type password
Figure 12-1: The Operator login window
Vivid i User's Manual
2378958-100 Rev. 02
Press
on the alphanumeric keyboard.
CONFIG
The Log In window is displayed asking for operator ID and
password (see Figure 12-1).
Select Log on when completed.
The Setup dialogue window is displayed (see Figure 12-2).
Presets and System setup
287