Direction Lock And Brake Adjustment; Front Caster Brakes Adjustment Procedure - GE Vivid 7 Service Manual

GE H
EALTHCARE
D FC091194, R
IRECTION EVISION
Section 6-8

Direction Lock and Brake Adjustment

6-8-1

Front Caster Brakes Adjustment Procedure

6-8-1-1 Manpower
2 persons
6-8-1-2 Tools
• Hexagon key 3/32" inch
• Phillips screw driver size 2
6-8-1-3 Preparations
1.) Set Rear Brakes to prevent system from rolling.
2.) Remove Front Bumper , see
6-8-1-4 Front Caster Brakes Adjustment
Brakedog "bites"
1.) Use a hexagon key, and screw the adjustment screw until the opening between brake dogs and
tires are approximate 2 mm.
2.) Install Front Bumper , see
3.) Test Front Brakes.
11
"Front Bumper Removal Procedure" on page
Adjustment screws
Figure 6-4 Front Brakes adjustment
"Front Bumper Installation Procedure" on page
Chapter 6 - Service Adjustments
2 mm opening
V 7 S M
IVID ERVICE ANUAL
8-100.
8-100.
6 - 9