Panasonic ET-JPF100BU Operating Instructions Manual page 9

Mounting procedure (continued)
Opening
Protrusion
Power supply unit
Tab
<AC IN>
socket
3) Mount the floor stand to the projector.
z Align the opening in the floor stand with the
position of the protrusion on the projector.
4) Slide the floor stand.
z Slide the floor stand so that the tab fits into
place into the <AC IN> socket side of the power
supply unit of the projector.
5) Secure the floor stand with the screws, captive
washers.
z Firmly secure the floor stand with the four
supplied screws, captive washers (M4 x 8).
ENGLISH - 9