Expansion Boards - Panasonic 4466 Technical Description

9.1. 9.1.
One or two expansion boards 4585 or 4464 can be mounted on the charger board.
a) Mount the expansion boards according to the picture below. Screws are supplied with the expansion boards separately.
b) Connect each Molex connector to contact header J2 on the expansion board, and to contact header J5 or J6 on the charger
board.
- J5 is powered from OUT0
- J6 is powered from OUT1
1. Charger board 4467
2. Expansion board
Do not use the corresponding voltage output on terminal J3 when an expansion board is connected.

EXPANSION BOARDS

22