Table of Contents
Advertisement
Disable nouveau.
5
In this procedure, a boot image file which does not load the nouveau driver is
NOTE:
created. Please check the procedure before execution and carefully execute it
in consideration of your environment.
Use the following procedure to create a boot image file that does not load the nouveau driver.
1)
Create the following file in the following directory, describe the contents and save it.
Directory
Filename
Descriptions :
2)
Execute the following command to create a boot image file.
# dracut –-force
By executing this command, you can create a boot image file that does not load
※
the nouveau driver at boot time.
3)
Please shutdown OS and install this product.
After rebooting, start the terminal and execute the following command to check that nouveau
is not loaded. If the X-Window System is running, exit according to step 4.
# lsmod | grep nouveau
If nouveau is displayed, there is probably an error in the description of the image file you created.
Please check and try again.
If the OS does not boot, the image file may also be incorrect.
※
Check if the elfutils-libelf-devel package is installed.
6
Please execute a following command.
# yum list installed | grep elfutils-libelf-devel
elfutils-libelf-devel package is sometimes already installed by the environment of the use.
In this case, go to step 7 and install the GPU driver.
:
/etc/modprobe.d/
:
blacklist-nouveau.conf
blacklist nouveau
options nouveau modeset=0
E-17
Advertisement
Table of Contents
