Toro ProLine H800 Installation Instructions
Debris suppression kit rotary mower
Hide thumbs
Also See for ProLine H800:
- Service manual (343 pages) ,
- Operator's manual (92 pages) ,
- Setup instructions (8 pages)
Advertisement
Quick Links
Debris Suppression Kit
ProLine H800 Rotary Mower
Model No. 134-4690
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
No parts required
Hopper screen assembly
Door screen
Bolt
Washer
Nut
Preparing the Machine
1.
Dump any grass from the grass hopper.
2.
Lower the grass hopper.
3.
Park the machine on a level surface.
4.
Engage the parking brake.
5.
Shut off the machine and remove the key.
© 2020—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Qty.
–
Prepare the machine.
1
1
4
Install the kit.
8
4
Register at www.Toro.com.
Form No. 3439-284 Rev A
Installation Instructions
Use
Original Instructions (EN)
All Rights Reserved *3439-284* A
Printed in the USA
Advertisement
Related Manuals for Toro ProLine H800
Summary of Contents for Toro ProLine H800
- Page 1 Form No. 3439-284 Rev A Debris Suppression Kit ProLine H800 Rotary Mower Model No. 134-4690 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine.
- Page 2 Installing the Kit Installing the Kit Open the hopper door. Line up the door screen with the existing door mesh. Use the 4 holes on the door screen to mark the 4 drill locations on the door mesh. Drill 7.0mm holes in the door mesh at the marked locations. Install the door screen onto the door mesh with 4 bolts, 8 washers, and 4 nuts (Figure g320409...
- Page 3 g217355 Figure 2 1. Release lever 2. Hopper screen Remove the existing hopper screen (Figure g215931 Figure 3 Install the new hopper screen and lock it in place. Maintenance Cleaning the Hopper Screen Service Interval: Before each use or daily Open the hopper door.