Page 1
(TAC0161) – SUMMARY – 43HX71, 43H71 are the same as 50H81 except for the parts and Convergence adjustment and Mechanical disassembly tabled on back of this sheet. Use this service manual together with the service manual of 50H81 (File No. 020-200109).
CONVERGENCE ADJUSTMENT Adjust convergence from center to circumference in order. 1. Select the adjustment mode following the steps on page 9 of original servicemanual. KEY FUNCTION IN THE CONVERGENCE ADJUSTMENT: RCUT Up : 2 button Selet Green color: 3 button Left : 4 button Blinking of cursor ON/OFF:...
Page 3
ADJUSTING DIMENSION OF EACH PICTURE SCREEN Screen Size " 1. (4:3) (HD/NTSC) • Adjust right and left 5.5 horizontal lines of RETMA signal for picture screen size after adjustment. • On one vertical side, the ellipse encircling a tiger mark should contact the upper limit of screen and the 12th line should be visible at the screen bottom.