Panasonic SR-DF101 Service Manual page 23

10 The exchange method of PCB for complete control
1 Remove terminal for complete power
• Lay the cooker on a rubber sheet or similar so as not to
damage the unit; open the outer lid and make the bottom
of the cooker facing upwards (see fi gure on the right).
• Unplug the power cord.
• Dismantle the set screw of the outlet cover (×1), take out
the outlet cover and complete outlet and outlet box.
• Remove the wirings of the power terminal (3 places).
2 Remove screw for body
• Remove screws for body (×4)
3 Remove the hinge cover
• Firstly, remove the fixing screw as shown on the right
fi gure. And then inserts a slotted screwdriver in the crack
at the hinge cover and the body.
• Using slotted screwdriver as a lever and pry the hinge
cover upwards. And separate the hinge cover and the
body.
21