Panasonic SR-DF101 Service Manual page 26

11 The exchange method of cast heater
1 Remove terminal for complete power and body
• Refer to the exchange method of base for control PCB (See item 1 to 4, P13), remove the terminal and body.
2 Remove the cast heater
• Remove the fi xing screws (×2) of cast heater.
• Take out the cast heater from inner enclosure.
2 Reassembly
• Reassemble the new cast heater in reverse order for disassembly.
NOTES: NOTES:
• Refer to P5 for wiring connection.
• When assembling, make sure to paste the fl ame retardant tape on the initial position as before.
24