Panasonic SR-DF101 Service Manual page 25

6 Remove the base for control PCB
• Unplug the wiring which connects with the control PCB
• Remove fi xing screw (×1).
• Hold the base for PCB and take it out directly.
* For the sake of safety, make sure you wear an ESD-
protective wrist strap or take preventive measures.
7 Take out the components of control PCB
• Break off the stationary claws slightly, lift up the control PCB (operation parts) and take them out.
• Use the same method to remove control PCB (power parts) and take it out.
8 Assembly of base for control PCB
• Reassemble the base of PCB for complete power in reverse order for disassembly.
NOTES: NOTES:
• Refer to P5 for wiring connection.
• When assembling, make sure to paste the fl ame retardant tape on the initial position as before.
claw
23
claw