ABB RELION REX640 Installation Manual page 65

1MRS759115 E
REX640
Installation Manual
a) Holding the cleave tool in a horizontal position, grip the handle while
leaving your index finger free to actuate trigger.
b) Place the ferrule into the hole of the positioner plate until it is fully inserted.
Figure 59: Placing the ferrule into the cleave tool
It is critical to fully insert the connector into the positioner plate.
Failure to do so, may cause poor cleave quality and/or damage
to the diamond blade.
Do not hold onto the connector during the cleave process. Doing
so may cause poor cleave quality.
Always follow termination kit manufacturers recommendation
for cleave tool service and maintenance.
c) Release the connector in the tool.
d) Using index finger, slowly and gently depress trigger to perform the cleave
process. The cleave process is complete when the fiber snaps away from
the connector. Do not release the trigger!
Mounting
65