8
Opening the housing
•
Switch the device off. The device must not be in energy-saving mode!
Please observe all safety guidelines in the "Important notes" chapter.
C
Pull the power plug out of the mains outlet.
Only insert the power plug after you have closed the housing.
•
Remove any connected cables in the unit that obstruct you.
•
Place the device in a convenient working position.
Variant A (version with knurled screws)
Fig. 1:
•
Unscrew the two knurled screws (1) on the back of the housing.
Fig. 2:
•
Slide the side cover approximately 2 cm (a) in the direction of the arrow (1), until the
stop.
CELSIUS M450/440
Variant A (version with knurled screws)
Variant A (remove side cover)
TD00-400.841.40.02.02
01.08
General information
Page 8 of 52
CS SD SP/CO
1.3
0
Siemens
Medical Solutions