Download Print this page

Sealey MC454E Instructions

Motorcycle lift 450kg - 12v electro/ hydraulic

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
1.1.
GENERAL SAFETY
WARNING! Disconnect lift from power supply before changing parts, servicing or performing any maintenance.
Ensure lift is kept clean and in good working order. Immediately repair or replace damaged parts.
9
Use recommended parts only. Incorrect parts may be dangerous and will invalidate the warranty.
9
Use a qualified person to lubricate and maintain the lift. DO NOT use brake fluid to top up system. Use Sealey hydraulic oil only.
9
Locate lift in a suitable, well lit work area. Keep area clean and tidy and free from unrelated materials.
9
Use lift on level and solid ground, preferably concrete, capable of withstanding the weight of the lift and any load placed on it.
9
Avoid tarmacadam since lift may sink in.
9
Ensure all non-essential persons keep a safe distance.
9
Always keep your hands and feet away from moving parts. DO NOT reach under the lift.
9
DO NOT operate the lift if parts are missing or damaged.
8
DO NOT adjust the safety overload valve.
8
Keep the lift clean for best and safest performance.
9
The maximum load is 450kg. DO NOT exceed this rated capacity.
9
Use this lift for lifting purpose only. NOT to be used for lifting persons. DO NOT use it for any other purpose it is not designed to
9
perform.
Keep children and unauthorised persons away from the work area.
9
Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery, and contain long hair.
9
Keep proper balance and footing, DO NOT overreach and wear non-slip footwear.
9
Ensure the vehicle is adequately secured to the lifting platform with appropriate straps.
9
Before lowering lift ensure that there are no obstructions underneath and that all persons are standing clear.
9
DO NOT use the lift if damaged, any suspect parts are noted or it has been subjected to a shock load.
8
DO NOT operate the lift when you are tired or under the influence of alcohol, drugs or any intoxicating medication.
8
DO NOT allow untrained persons to operate the lift.
8
DO NOT make any modifications to the lift.
8
DO NOT get the lift wet.
8
When not in use remove power supply, and store in the down position in a safe, dry, childproof area.
9
WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product,
but must be applied by the operator.
2. INTRODUCTION
All steel construction with a 450kg capacity. 12V Electro/Hydraulic lifting system for simple, fast operation. Can be powered by a 12V vehicle
battery or a Roadstart unit. Support platform fitted with full width loading ramp. Supplied with motorcycle front wheel locking attachment for tyre
widths up to 135mm to assist in securing the vehicle. Fitted with multi-position safety lock to prevent accidental lowering. Suitable for use in a
garage or shed without the need of mains 230v electricity supply or for a mobile mechanic or race pits. Designed for use with centre or side stand
motorcycles or with a rear paddock stand.
3. SPECIFICATION
Model no: ................................................................. MC454E
Capacity: ...................................................................... 450kg
Minimum height: ......................................................... 215mm
Maximum height: ........................................................ 760mm
Platform Width: .......................................................... 650mm
Platform Length: ....................................................... 1828mm
Electrical Power Supply: ..................................................12V
© Jack Sealey Limited
MOTORCYCLE LIFT 450KG - 12V ELECTRO/
HYDRAULIC
MODEL NO.:
Wear safety
Warning:
footwear
Crushing of
Hands
Original Language Version
MC454E
No reaching in
MC454E
Issue 1
10/10/22

Advertisement

loading

Summary of Contents for Sealey MC454E

  • Page 1 MC454E MODEL NO.: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 As the lift is completely lowered, the safety brake automatically engages ready for ascending. NOTE: The safety brake only engages once the lift is completely lowered, NOT if the lift is stopped during descent and raised again. In this instance the safety brake MUST be manually engaged. Original Language Version © Jack Sealey Limited MC454E Issue 1 10/10/22...
  • Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. REGISTER YOUR PURCHASE HERE Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk...