Tabletop Models - Electrolux SkyLine PremiumS 6GN2/1 Installation Manual

6 – 10 GN models
20 GN models
CAUTION
The appliance must be level.
E.4.4

Tabletop models

For safety reasons, tabletop models should only be placed on
top a manufacturer-original oven stand or cupboard structure.
Choose the appropriate structure in the accessories catalogue
according to your model.
Mounting onto an oven stand (size GN 1/1 – 2/1)
1. Replace the oven feet with the special feet supplied with
the oven stand accessory.
2. Place the appliance onto the oven stand by inserting the
locating feet into the tubular uprights.
Mounting onto a cupboard (sizes GN 1/1 – 2/1)
1. Disassemble the rear panel "B" and control panel "A" (if
expected);
C
D
2. Replace the oven feet with the special feet supplied with
the cupboard accessory;
3. Place the appliance onto the cupboard by inserting the
locating feet into the tubular uprights;
4. Refit the control panel "A" and the rear panel "B".
5. Proceed with the oven connections.
IMPORTANT
The connection pipes of the oven can be run
either on the back either on the side.
• remove and replace the panels "C" and "D"
between them;
• remove the pre-cutted plates "E" and "F" to let
the drain pipe pass through the hole on the
back or at the side;
B E
F
A
23