Table of Contents
Advertisement
12
en | Installation
5
Installation
This section includes hardware details and the instructions you need to install the motion
detector base.
5.1
Self-locking cam
The detector includes a self-locking cam for easy installation. Refer to the following
information to open and close the detector.
Open the detector and remove the base
1.
2.
3.
Attach the detector onto the base
Notice!
When you remove the detector from the base, the cam automatically returns to the locked
i
position. When you place the detector onto the base, the cam must remain in locked position.
Do not manually change the cam once you remove the detector from the base; doing so
unlocks the detector and prevents you from putting the detector correctly onto to base.
1.
2.
2022.01 | 01 | F.01U.401.708
Insert a flathead screwdriver into the locking tab hole.
Turn to the unlock position.
Slide, then lift the detector from the base.
Put detector onto the base.
Slide the detector up until you hear it "click."
Installation manual
Commercial Series TriTech and TriTech AM
Bosch Security Systems B.V.
detectors
Advertisement
Table of Contents
