Epson Stylus Pro 11880 Unpacking And Setup Manual page 16

3. Aligning it with the rails on both sides, slowly
roll the paper roll into place and set it on the
mounting brackets inside the printer.
14
4. Make sure that the Pause light is not flashing,
and then set the paper lever to the released
position.
LEVER RELEASED. LOAD PAPER appears on the
LCD panel.
5. Insert the paper into the paper insertion slot.
Pull the paper down through the paper
insertion slot so that it comes out below.
Taking care not to fold the edge of the paper,
insert it so that there is no slack.
6. Adjust the feed strength by pressing the
Paper Feed button on the control panel.