Unpacking And Assembling The Base Unit - Epson Stylus Pro 11880 Unpacking And Setup Manual

Unpacking and Assembling the
Base Unit
Checking the contents
1. Open the box, and then lift up the box that
contains the base unit and away from the
printer.
2. Open the box that contains the base unit, and
make sure that all the items shown below are
included and not damaged.
Base upright, left / Base upright, right
Horizontal strut
Hex wrench
Wing nuts, spring washers, and washers (4)
Hex socket head bolts (4)
Assembling the base unit
w
Warning:
Have two people working on either side to
assemble the base unit (23.2 kg).
1. Hold base upright left and a horizontal strut
as shown. Then fix the strut to the base using
the two hex socket head bolts with the hex
wrench.
Note:
Do not fasten the screws too tight. Leave room to
adjust the position when you fasten the screws on
the other base upright.
2. Referring to step 1, secure the other side of the
strut to the base.
3. Fasten four screws on the both sides of the
base upright securely.
This completes assembly of the base unit. Then,
see the next section for unpacking the printer.
3