Connecting The Printer With Your Computer - Epson Stylus Pro 11880 Unpacking And Setup Manual

6. Set the paper lever to the secured position, and
then close the front cover.
Press the button or wait a while.
7. If DO YOU WANT TO USE THE FOLLOWING PAPER?
appears on the LCD panel, press the Menu
button to select the media, and then press the
Enter button to set the media.
The previous setting appears on the LCD
panel. If the media type is correct, press the
Paper Source button.
Note:
Do not leave the paper in the printer for a long period
of time; its quality will deteriorate. We recommend that
you remove the paper from the printer after printing.
20
Connecting the Printer with Your
Computer
Connect the printer and computer with a USB
cable or Ethernet cable. Use the following cables.
❏ USB cable
❏ 100BaseTX or 1000BaseT Category 6 Shielded
twisted-pair cable
1. Make sure the printer is turned off.
2. Connect the cable to the printer, and plug the
other end of the USB cable to the computer or
the other end of the Ethernet cable to the
Ethernet hub.
USB connection:
Network connection:
Note:
When you connect both USB cable and Ethernet cable,
install the printer software from each computer
separately. You can connect both USB cable and
Ethernet cable to the printer at the same time.