Configure High And Low Value Math Block; Configure Average Math Block - ABB C1300 User Manual Supplement

...2 MATH CONFIGURATION

2.2.4 Configure High and Low Value Math Block

2.2.5 Configure Average Math Block

12
High (or Low) Value Source
Select the source whose minimum or maximum value is to be detected.
For description of sources, refer to APPENDIX 1.
Reset High/Low Input
Select the digital source required to reset the minimum or maximum value.
For description of sources, refer to APPENDIX 1.
See Section 2.2.
Averaging Input
Select the input which is to be averaged.
For description of sources, refer to APPENDIX 1.
Time Scale
Set the time scale interval over which the input is to be averaged, between 1 and 1440 minutes
(24 hours).
Reset Average Source
Select the digital source required to reset the average value to the present input value.
The reset is leading edge triggered.
See Section 2.2.