Sc180 Expansion Enclosure Psu Features And Indicators - Dell SC180 Owner's Manual

SC180 Expansion Enclosure PSU Features and Indicators

SC180 Expansion Enclosures include two power supply units (PSUs) in two interface slots.
Figure 5. SC180 Expansion Enclosure PSU Features and Indicators
Item Control/Feature
1 Release latch
2 PSU fault
3 AC fault
4 Power OK
5 Power outlet
6 Power switch
Separate and unique conditions are indicated if all three LEDs are in the same state:
• If all three LEDs are off, then neither PSU has AC power.
• If all three LEDs are on, then the General Enclosure Management (GEM) software has lost
communication with the PSU.
12
Icon Description
— Press the release latch to remove the PSU.
• Amber (steady) — PSU fault, PSU not supplying
power
• Amber (flashing) — PSU firmware is downloading
• Amber (steady) — AC power is not detected
• Amber (flashing) — PSU firmware is downloading
• Green (steady) — This PSU is providing power
• Green (flashing) — AC power is present, but this
PSU is in standby mode (the other PSU is providing
power)
— Power outlet for the expansion enclosure
— Controls power for the expansion enclosure
About the SC180 Expansion Enclosure