Measurements And Adjustments; Usb Test Mode; How To Install The Application For Test Mode - Panasonic KX-NS0154 Service Manual

Dect 4-channel ip cell station unit

Hide thumbs Also See for KX-NS0154:

Table of Contents

11 Measurements and Adjustments

The various tests are avialbale by using USB communication with your PC.

Following tests are described in this service manual.

• Clock Adjustment (P.22)

Note:

Make sure that you have installed USB driver on your Windows PC before starting test mode.

Supported Operating Systems

This application software operation has been confirmed under the following Operating Systems

- Windows XP

- Windows Vista

- Windows 7

Note:

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows

2000, Windows XP, Windows Server 2003, Windows Vista, Windows 7 are trademarks and trade names of Microsoft

Corporation in the United States and/or other countries.

PC is required to measure the characteristics and check the function. USB driver needs to be installed on it.

11.1.1.1. USB Driver Installation

Preparation:

• USB-miniB cable.

• copy the USB driver "linux-cdc-acm.inf" to your PC.

• Refer to the following URL for a USB driver.

https://www.kernel.org/doc/Documentation/usb/linux-cdc-acm.inf

11.1.1.2. USB Driver installation

• Connect USB-miniB cable to your PC.

• Open device manager, and select USB device of USB cable.

• Select "linux-cdc-acm.inf" as USB driver.

KX-NS0154

Table of Contents