Table of Contents
Advertisement
3 Deployment Procedure
d.
Pass the cord through the groove of the unit in one of the following three ways.
1
1
To AC Adaptor
2.
Connecting the Unit to the Network
Temporarily install the unit in the best site as defined in Site Planning, connect the unit to a nearby hub.
[LAN Synchronization only]
LAN synchronization should be diagnosed in advance when connecting to a network that does not comply
with recommendations 1 and 2 in "5.3 Recommended Network Configuration".
For details about LAN synchronization diagnosis, refer to "5.4 LAN Synchronization Diagnosis".
20
Installation Guide
2
To AC
Adaptor
3
To AC Adaptor
Advertisement
Table of Contents
