Epson PowerLite 1725 User Manual page 130

Solving Problems
130
The message
Not Supported
■ Make sure the correct
(see page 103).
Make sure your computer's resolution doesn't exceed UXGA
■
×
(1600 1200) and the frequency or refresh rate is supported by
the projector (see page 146). If necessary, change your computer's
resolution setting.
Only part of the image is displayed.
Press the button on the remote control to select a
■
Aspect
different setting (see page 32).
If projecting from a computer, press the
■
remote control. Also make sure the image
correct in the Signal menu (see page 103).
■ Check the projector's
or , depending on the size of your computer's
Normal Wide
display panel.
Make sure your computer is not set to display an extended
■
desktop.
Press the button on the remote control to cancel the E-Zoom
■
Esc
function.
Make sure your computer's resolution setting is correct. Ideally, it
■
×
should be 1280 800 to match the projector's native resolution
for the PowerLite 1735W, or 1024
If this option isn't available, select one of the other compatible
video formats listed on page 146.
■ You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
is displayed.
is selected in the Signal menu
Input Signal
Auto
Position
setting (see page 102). Select
Resolution
×
768 for the PowerLite 1725.
button on the
setting is