Epson PowerLite 1725 User Manual page 63

3. Make sure Location is set to
Select
Automatic
Select Network Port
Configurations
then select AirPort
4. Select
Network Port Configurations
menu.
5. Under Port Configurations, select
6. Click
Apply Now
7. Click the AirPort icon on the menu bar at the top of the Mac
desktop. You see the AirPort status menu:
Choose the SSID you
assigned to the
projector
8. Check to make sure AirPort is turned on.
9. Select your projector's SSID.
.
Automatic
in the Show pull-down
AirPort
. Then close the window.
.
Setting Up Network Projection
note
If you don't need the other
network port configurations,
disable them by deselecting
their checkboxes.
When you connect in Ad
Hoc mode, your computer is
disconnected from any other
wireless networks. If you
need to remain connected to
your wireless network, use
Access Point mode, as
described on page 64. Also,
make sure you reconnect to
your original wireless
network when you are done
using the projector.
63