Using Projector E-Mail Alerts - Epson PowerLite 1725 User Manual

If your network assigns addresses automatically, turn on the
■
setting.
DHCP
If your network does not assign addresses automatically, turn
■
off and enter the projector's
DHCP
, and
Mask Gateway Address
To enter numbers, use the
control to highlight the number you want to input, then press
the button. When you're finished changing an address
Enter
in the network menu, highlight
button.
9. To prevent the IP address from appearing on the standby screen,
set the
IP Address Display
When you're done making all necessary changes, press
the menu system.

Using Projector E-mail Alerts

When this feature is enabled, the projector sends you an e-mail alert if
it has any problems.
1. Press the button on the remote control, select the
Menu
menu, then press
Network
2. Choose
Network Configuration
IP Address
, as needed.
buttons on the remote
, then press the
Return
setting to .
Off
.
Enter
and press .
Enter
,
Subnet
Enter
to exit
Menu
Setting Up Network Projection
91