Table of Contents
Advertisement
•
Do not knock or drop the monitor
during operation or transportation.
•
The USB Type-C port could only be
connected to specify equipment with
fire enclosure in compliance with IEC
62368-1 or IEC 60950-1.
•
Excessive usage of monitor can cause
eye discomfort, it's better to take
shorter breaks more often at your
workstation than longer breaks and
less often; for example a 5-10 minute
break after 50-60-minute continuous
screen use is likely to be better than
a 15-minute break every two hours.
Try to keep your eyes from eye strain
while using the screen for a constant
period of time by :
• Looking at something varying dis-
tances after a long period focusing
on the screen.
• Making a conscious effort to blink
often while you work.
• Gently closing and rolling your
eyes to relax.
• Repositioning your screen to ap-
propriate height and angle accord-
ing to your height.
• Adjusting the brightness and con-
trast to appropriate level.
• Adjusting the environment light-
ing similar to that of your screen
brightness, avoid the fluorescent
lighting, and surfaces that don't
reflect too much light.
• Seeing a doctor if your symp-toms.
Maintenance
•
To protect your monitor from possible
damage, do not put excessive pressure
on the EPD (Electronic Paper Display).
When moving your monitor, grasp the
frame to lift; do not lift the monitor by
placing your hand or fingers on the
EPD.
•
Oil-based cleaning solutions may
damage the plastic parts and void the
warranty.
•
Unplug the monitor if you are not
going to use it for an extensive period
of time.
•
Unplug the monitor if you need to
clean it with a slightly damp cloth. The
screen may be wiped with a dry cloth
when the power is off. However, never
use organic solvent, such as, alcohol,
or ammonia-based liquids to clean
your monitor.
•
To avoid the risk of shock or
permanent damage to the set, do
not expose the monitor to dust,
rain, water, or excessive moisture
environment.
•
If your monitor gets wet, wipe it with
dry cloth as soon as possible.
•
If foreign substance or water gets in
your monitor, please turn the power
off immediately and disconnect the
power cord. Then, remove the foreign
substance or water, and send it to the
maintenance center.
•
Do not store or use the monitor in
locations exposed to heat, direct
sunlight or extreme cold.
•
In order to maintain the best
performance of your monitor and
use it for a longer lifetime, please use
the monitor in a location that falls
within the following temperature and
humidity ranges.
• Temperature: 0-40°C 32-104°F
• Humidity: 20-80% RH
Important information for Burn-in/Ghost
image
•
If there is ghosting of the on-screen
image, then use the
Sticking button on the display to
refresh the screen.
2
Clear Image
Advertisement
Table of Contents
